Desk consisting of monobloc top and side shelves (right or left, optional) in veneered MDF fitted with holes and bushings to allow the fixing of the legs; worktop consisting of two tops fixed together by a central “H” support, which creates a front open compartment 71x27 h.6 cm and a rear compartment, that can be inspected through a magnetized panel, to house electrical sockets and chargers. Upper top finish, veneered with natural or charcoal-dyed chestnut, Stone Oak® with water-based finish, or multilaminar Striped Grey wood veneer with acrylic finish, or matt black scratch-resistant paint finish. Lower top and shelves always lacquered matt black scratch-resistant finish. Legs in Ø22 mm steel rod, with inserted fixing elements and integrated height-adjustable plastic feet, finish with epoxy powder coating in RAL 9017 black or Gunmetal grey colour. The version with shelves is fitted with a supplementary steel support with integrated height-adjustable plastic feet, secured to the bottom shelf. The scratch-resistant coating increases scratch resistance compared to standard coatings, but doesn’t completely eliminate the possibility of scratches on the surface. Wood is a living material; therefore, it can have slight color and dimension changes. The presence of any non-homogeneous color shades is not to be considered a defect but a quality. Please note that the direct sunlight exposure may alter the wood color; therefore, we recommend the periodic position shift of the objects placed on the furniture for the first months to avoid differences in shades between exposed and covered portions. STRIPED GREY: it is a decorative multilaminar wood veneer, always finished with a transparent acrylic painting, which features exclusive patterns reproducing the natural characteristics of wood. We would like to remind you that, being a natural and living wooden material, it may present non- homogeneous colour shades, which are peculiarities of the material itself. STONE OAK®: this wood owes its particular coloring to an entirely natural process. Because of this, some slabs may look more brown than others. Our commitment is to provide you a high-quality product; any differences in color should not be considered as defects. On request, with a surcharge of 3%, an additional protective (acrylic solvent) painting is available for the Stone Oak® finishing only. It should be noted that this additional coating slightly changes the natural color and texture of the surface. Although this supplementary painting increases the surface resistance, it is still a natural material; therefore, small superficial stains, due to oil or other substances, must be promptly removed, before being absorbed in depth by the wood. Thus, we recommend regular care and maintenance.
