Modular elements of different dimensions, available for indoor and outdoor. polyurethane foam. Covering in needle punched, resinated, non-woven polyester fibre, bonded onto a polyamide velveteen backing. Fabric or leather upholstery. The fabric version only is fully removable by Velcro fastenings. All elements in leather have perimeter seams, and the upholstery is non-removable. Outdoor version: frame in steel lacquered for outdoor for bases and in steel lacquered for outdoor and plywood for outdoor for backrests and armrests. For bases only, support in cross-woven, coated rubber elastic straps and hooks in Stainless Steel for outdoor. Padding with open cell structure polyurethane foam, with draining fabric cover. Upholstery with outdoor fabrics only completely removable by Velcro fastenings. For both versions floor support provided by adjustable plastic feet. The various elements are joined together by means of hooks. Seat depth: 68 - 94 - 120 - 134 - 146 cm. For information on the compatibility of the collection’s coverings with each product, please refer to the compliance sheet provided in the “Materials” section of the website. For leather coverings the “Leather A” or “Leather B” Maintenance Kit is included with the product. On 146 cm and 172 cm armrests and backrests, both in fabric and leather, there is always a central stitching. On the 146 cm base, both in fabric and leather, there is always a central stitching. For the OUTDOOR version, especially after prolonged rainy or humidity periods, it is suggested to rotate the elements and/or to temporarily lift the seat/ back/armrest cushions to allow a complete drying and to avoid accumulation of dirt and moisture, causing the formation of mold. We recommend placing the product on terraces or verandas to guarantee its durability over the years. It is recommended to use a “Protective Cover” to improve the longevity of the product. For further information about the dedicated maintenance, please refer to the technical sheet available in the “Materials” section on our website. All elements can be ordered 5 to 10 cm higher than standard with an extra 10% on the listed price each. On request can be ordered a spacer, to lift the elements of further 4 cm: for the indoor version only, through spacers (A) the to be screwed to the standard feet (€ 10,00 each), meanwhile for the outdoor version by replacing the standard feet (h. 8 cm in total) with a foot with a height of 12 cm. The various elements are joined together by means of hooks, as per the instructions supplied with the product. Hooks for assembly for indoor Hooks for assembly for indoor Hooks for assembly for outdoor Hooks for assembly for outdoor elements with feet elements with feet and spacers elements with feet in height 8 cm elements with feet in height 12 cm For composition with different elements, please attach a general sketch to the order.
