ROD SYSTEM

Supporting structure in lacquered drawn tubular steel, seat sprung with coated rubber elastic straps and padding in polyurethane foam. Backrest and armrest structure in layered HPL panel. Covering in 100% polyether, thermally bonded onto a polyamide velveteen backing. Backrest and seat cushions, joined together by zipper, in prewashed and sterilized goose down stitched into separate compartments, with differentiated density polyurethane foam insert. The seat cushions are quilted with buttons at sight. On request, seat cushions available quilted without buttons. Armrest cushions in polyurethane foam covered with prewashed and sterilized goose down stitched into separate compartments, with a poplar plywood supporting panel, fixed to the frame by plug-in hinges. Feet in AISI 304 Stainless Steel with polished or matt satin-finish or in steel with burnished, Gunmetal gray or matt-black color painted steel, screwed to the base with a bushing. Floor support provided by adjustable plastic tips. Fabric or leather upholstery, both fully removable by zippers and Velcro fastenings. Seat depth: 60 - 134 - 154 cm. Table to be used in composition with MDF structure, veneered with Stone Oak® plates, with acrylic paint finish. For information on the compatibility of the collection’s coverings with each product, please refer to the compliance sheet provided in the “Materials” section of the website. For leather coverings the “Leather A” or “Leather B” Maintenance Kit is included with the product. Buttons available in two variants and, as standard, matching the color of the chosen cover. On request, to be specified when ordering, available also contrasting buttons. Wood is a living material; therefore, it can have slight color and dimension changes. The presence of any non-homogeneous color shades is not to be considered a defect but a quality. Please note that the direct sunlight exposure may alter the wood color; therefore, we recommend the periodic position shift of the objects placed on the furniture for the first months to avoid differences in shades between exposed and covered portions. STONE OAK®: this wood owes its particular coloring to an entirely natural process. Because of this, some slabs may look more brown than others. Our commitment is to provide you a high-quality product; any differences in color should not be considered as defects. On request, with a surcharge of 5%, an additional protective (acrylic solvent) painting is available for the Stone Oak® finishing only. It should be noted that this additional coating slightly changes the natural color and texture of the surface. Although this supplementary painting increases the surface resistance, it is still a natural material; therefore, small superficial stains, due to oil or other substances, must be promptly removed, before being absorbed in depth by the wood. Thus, we recommend regular care and maintenance. Standard feet in tubular Stainless Steel Ø1,5 cm; on request available in Ø2,2 cm, with upcharge of € 16,00 each. The composition can be combined with the elements of the model ROD BEAN. Standard seat cushion ROD BEAN when in composition with ROD SYSTEM elements. For composition with different elements, please attach a general sketch to the order.