Sofa with fixed dimensions, for indoor and outdoor use, featuring an 8 mm thick HPL seat panel and a supporting frame in 30x30 mm tubular AISI 304 stainless steel where armrests and backrests are attached, using bushings, available in either a woven or upholstered version. Woven version: armrest and backrest frame made of Ø20 mm AISI 304 stainless steel tube, woven with full-weave cellulose rope or hide profile (for indoor use), and full-weave synthetic rope or in PVC (for indoor and outdoor), available in the collection finishes. Upholstered version: armrest and backrest frame made of 40x10 mm section AISI 304 stainless steel tubing, and structural elastic material, covered with a lining made of 100% polyether, for indoor use coupled with a thermo fixed polyamide velveteen backing; for outdoor version with open cell polyurethane foam, with draining fabric cover. Seat panel for indoor use available in veneered and beveled Canaletto walnut finish with water-based acrylic coating, or, for both indoor and outdoor use, lacquered with scratch-resistant matt paint in black, white RAL 9001, or gray NCS S 6000-N. Indoor seat cushions in differentiated density polyurethane foam covered with a lining made of polyester fiber, with needle-treatment and resin- coated, coupled with a polyamide velveteen backing. Support cushions 50x50 cm filled with pre-washed and sterilized goose down, stitched into separate compartments. cm made of outdoor fiber with an open-cell polyurethane foam insert, covered with a draining fabric cover. For both versions, upholstery in fabric or leather for indoor use, and in outdoor fabrics only for the outdoor version, fully removable with Velcro fastenings for backrests and armrests, and with zippers for seat cushions and support cushions. Feet in AISI 304 stainless steel Ø22 mm, fixed to the supporting structure using bushings, with floor support provided by adjustable black plastic tips. All metal parts are finished with outdoor epoxy polyester powders in burnished color. Seat depth without support cushions: 81 cm. Seat depth with support cushions: 65 cm. For information on the compatibility of the collection’s coverings with each product, please refer to the compliance sheet provided in the “Materials” section of the website. For leather coverings the “Leather A” or “Leather B” Maintenance Kit is included with the product. For each seat, 2 cushions of 50x50 cm are included in the price. Wood is a living material; therefore, it can have slight color and dimension changes. The presence of any non-homogeneous color shades is not to be considered a defect but a quality. Please note that the direct sunlight exposure may alter the wood color; therefore, we recommend the periodic position shift of the objects placed on the furniture for the first months to avoid differences in shades between exposed and covered portions. The scratch-resistant coating increases scratch resistance compared to standard coatings, but doesn’t completely eliminate the possibility of scratches on the surface. For the OUTDOOR version, especially after prolonged rainy or humidity periods, it is suggested to rotate the elements and/or to temporarily lift the seat/ back/armrest cushions to allow a complete drying and to avoid accumulation of dirt and moisture, causing the formation of mold. We recommend placing the product on terraces or verandas to guarantee its durability over the years. It is recommended to use a “Protective Cover” to improve the longevity of the product. For further information about the dedicated maintenance, please refer to the technical sheet available in the “Materials” section on our website. Weave detail Unlike the veneered version, the lacquered seat panel features a 10 mm radius chamfer.
