Modular elements in different sizes available for indoor and outdoor use. differentiated density polyurethane foam, covered with mattress pad filled with pre-washed and sterilized goose down, stitched into separate compartments, or, upon request, with a mattress pad covered with acrylic fibers. Fabric or leather upholstery, fully removable with Velcro fastenings. Outdoor version: base frame made of fully varnished steel for outdoor use, and backrest and armrest frame in varnished steel for outdoor use and outdoor plywood. For the base only, spring system with cross-woven elastic straps made of coated rubber with stainless steel hooks for outdoor use. Padding with open-cell structure polyurethane foam, covered with mattress pad with fibers for outdoor use and a draining fabric cover. Upholstery with outdoor fabrics only, fully removable with Velcro fastenings. For both versions floor support provided by adjustable plastic feet. The elements are joined using specific hooks. Seat depth: 68 - 94 - 120 - 134 - 146 cm. For information on the compatibility of the collection’s coverings with each product, please refer to the compliance sheet provided in the “Materials” section of the website. For leather coverings the “Leather A” or “Leather B” Maintenance Kit is included with the product. On 146 cm and 172 cm armrests and backrests, with upholstery in patterned, floral, textured fabrics, or velvet and leather, there is always a central stitching. On the 146 cm base, both in fabric and leather, there is always a central stitching. If this seat element is combined with a 146 or 172 cm armrest or backrest, these will also be provided with a central seam. For the OUTDOOR version, especially after prolonged rainy or humidity periods, it is suggested to rotate the elements and/or to temporarily lift the seat/ back/armrest cushions to allow a complete drying and to avoid accumulation of dirt and moisture, causing the formation of mold. We recommend placing the product on terraces or verandas to guarantee its durability over the years. It is recommended to use a “Protective Cover” to improve the longevity of the product. For further information about the dedicated maintenance, please refer to the technical sheet available in the “Materials” section on our website. On request, all indoor elements can be covered with the mat in acrylic fibre layers, instead of goose down. All elements can be ordered 5 to 10 cm higher than standard with an extra 10% on the listed price each. On request can be ordered a spacer, to lift the elements of further 4 cm: for the indoor version only, through spacers (A) the to be screwed to the standard feet (€ 10,00 each), meanwhile for the outdoor version by replacing the standard feet (h. 8 cm in total) with a foot with a height of 12 cm. The various elements are joined together by means of hooks, as per the instructions supplied with the product. Hooks for assembly for indoor Hooks for assembly for indoor Hooks for assembly for outdoor Hooks for assembly for outdoor elements with feet elements with feet and spacers elements with feet in height 8 cm elements with feet in height 12 cm For composition with different elements, please attach a general sketch to the order.
