Armchair and two-seater sofa available for indoor (armchair only) and outdoor. frame in 20x20 mm squared tubular steel, with suspensions supported by polypropylene slats with fiberglass core (GOODSIDE®). Sides made of shaped solid ash wood Ø40 mm, available in natural or charcoal-dyed finishes, joined to the frame with pins and screws in AISI 316 stainless steel and woven backrest with hide profile or synthetic rope in the collection finishes. Floor support provided by interchangeable tips in black plastic or felt. Seat and backrest cushions padding with differentiated density polyurethane foam, covered with a lining made of polyester fiber, with needle- treatment and resin-coated, coupled with a polyamide velveteen backing. Fabric or leather upholstery, fully removable with zippers. Outdoor version: armchair and two-seater sofa with frame in AISI 316 stainless steel with matte satin finish, made of curved tubulars Ø20 mm and seat frame in 20x20 mm squared tube, with suspensions supported by polypropylene slats with fiberglass core (GOODSIDE®). Sides made of shaped solid Teak wood Ø40 mm, joined to the frame with pins and screws in AISI 316 stainless steel, and woven backrest with synthetic rope in the collection finishes. Floor support provided by interchangeable black plstic tips. Seat and backrest cushions padding with differentiated density open cell structure polyurethane foam, with a draining fabric cover; for the armchair only, as an alternative to the backrest cushion it is possible to have two support cushions 45x45 cm in outdoor fiber with open cell structure polyurethane foam insert, with a draining fabric cover. Upholstery with outdoor fabrics, fully removable with zippers. Seat depth: 56 cm. For information on the compatibility of the collection’s coverings with each product, please refer to the compliance sheet provided in the “Materials” section of the website. For leather coverings the “Leather A” or “Leather B” Maintenance Kit is included with the product. For the OUTDOOR version, especially after prolonged rainy or humidity periods, it is suggested to rotate the elements and/or to temporarily lift the seat/ back/armrest cushions to allow a complete drying and to avoid accumulation of dirt and moisture, causing the formation of mold. We recommend placing the product on terraces or verandas to guarantee its durability over the years. It is recommended to use a “Protective Cover” to improve the longevity of the product. For further information about the dedicated maintenance, please refer to the technical sheet available in the “Materials” section on our website. Wood is a living material; therefore, it can have slight color and dimension changes. The presence of any non-homogeneous color shades is not to be considered a defect but a quality. TEAK: Teak wood comes from certified plantations, and it is an extremely durable material, resistant to weathering and acids, because of the presence of an oil-resin component that ensures exceptional durability. It features a wide range of colors that vary greatly, from pale yellow to bronze, with a reddish hue. Extended and continuous exposure to weathering agents changes its surface layer, leading to oxidation that gives it a gray-silver tone. A regular maintenance helps to preserve the wood’s original color over time; any differences in color should be considered as qualities rather than defects, as they are a characteristic feature of Teak. For wooden finishing the “Outdoor Wood” Maintenance Kit is included with the product.
